Spiral Knot Hemp Necklace with Shark’s Tooth Pendant

Back in July while beach-combing in Monterey with my sister I found half of an old shark’s tooth. She was looking for one to make into a necklace, while I was looking for blue and green sea glass. We each bent down about the same time…she came up with a pretty piece of blue glass and I came up with a shark’s tooth! 🙂

Anyhoo ~ I took three lengths of 20lb hemp string…one about 24″ long the other two about 3 yards long. Tied a knot at one end, slipped a carved bone bead on and then tied another knot. Came down about an inch and tied another knot then started on the spiral knots (I think it’s called a HALF KNOT).


First I took the right-side and made a loop (backwards “c”) and brought it OVER the middle string (your short length goes in the middle with the two long lengths on either side of it)

Next I took the left side, made a “c” and then went under the backwards “c”, behind the middle length, and then over the top (inside) of the right loop. So now the STARTING left-side in now on the right front and the STARTING right-side is on the left back.

Pull together snuggly and start the cycle over. If you keep doing the same knot over it makes the spiral effect. If you want it flat…you have to reverse the procedure…your next knot would starting from the left-side (making two half-knots, first from the right the second from the left, makes a square knot).

Now…with the shark’s tooth I’m having a real problem with how to wire wrap the dang thing. It’s a bad shape, would be better if I could hang it sharp side up…but that would look silly.

Waiting for my sister to say it’s ok to try to drill through the top part of the tooth. I told her I’m not sure how “fossilized” it’s become. It’s definitely been worn by being in the sea, but it also looks like it’s been in the process of fossilizing. I may be able to drill directly into the top of it, instead of drilling a hole horizontally.

Anyone out there drilled a hole through a partially fossilized shark’s tooth?

Beading and Wire-Wrapping Sea Glass

Took yesterday off of work for my birthday…spent a leisure day of beading, wire wrapping, lunch and a movie.

First off…if you haven’t already seen it, you gotta go see the 3-D version of Journey to the Center of the Earth! OMGosh! That was fun.

Sunday night I started a necklace to hang one of my pieces of sea glass that I collected on the beach in Monterey earlier this month. Took apart two necklaces I found for 99 cents at our local Goodwill store and used the beads to make my own design. I think they may be clay beads…I liked them. Had some green moss stone beads and other beads floating around…dumped them into a dish and just used whatever caught my fancy. Well…didn’t like how the first one laid. I used two wooden disk beads too close to the wire-wrapped glass and it just didn’t lay the way I wanted it to.

Here’s what the first necklace looked like ~

Here’s what the remake looks like…the one that I have on today. Had to re-wrap the green glass piece…didn’t get it the same, sorta liked it better the first time. Oh well. The first time I wrapped it so it went straight onto the necklace without a jump ring…the second time I used a jump ring to attach the glass to the necklace.

And here is what I used…beading wire, beads, 20 gauge copper wire, hemp 20 lb test, and a nifty cast iron grippy doo-dad that I picked up for 50 cents at a yard sale.